Did the ability to Arm Env4 by URL stop working...

Information and support for EnvisaLink modules.

Moderators: GrandWizard, EyezOnRich

brentgunn
Posts: 2
Joined: Thu Dec 15, 2016 9:59 pm

Did the ability to Arm Env4 by URL stop working...

Postby brentgunn » Tue Aug 11, 2020 7:15 pm

Hey everyone.
I setup a powershell script a while back that would arm my alarm using the
http://user:user@192.168.1.x/2?A=3p=1x=YYYY
command to arm my system.

I had things shut down for a while during some construction around the house and want to re-enable it and i cant seem to get that to work.

When using the Developer tools on chrome i can see when you click the ARM button it appears to still use A=3 - A=4 is disarm.

Anyways, can anyone confirm this is still the correct URL.
Thanks!

sks8100
Posts: 4
Joined: Mon Aug 31, 2020 6:10 pm

Re: Did the ability to Arm Env4 by URL stop working...

Postby sks8100 » Thu Sep 17, 2020 10:16 am

This place is the black hole man. Put a question on a forum and majority go unanswered. Envisalink needs to up their support model.

for my alarm DCS832/1616 with env 4:

away mode:
http://IP/2?A=3&p=1&X=1234
where 1234 is your alarm code and IP is the IP of the envisalink local server

disarm is
http://IP/2?A=4&p=1&X=1234

for the life of me i cant figure out how to turn on stay mode. However the codes above still work. If anybody know how to turn on stay home please put it down in the thread.

As for user auth i'm passing the credenials through an HTTPBasic auth header in a python script. This way i can connect it to my phone or watch and use siri for the above.

Hope this helps

richieframe
Posts: 1
Joined: Sat Sep 19, 2020 3:04 am

Re: Did the ability to Arm Env4 by URL stop working...

Postby richieframe » Sat Sep 19, 2020 3:25 am

As listed in the first reply, you are missing the ampersand delimeters from the URL, and the X should be capitalized

GrandWizard
Posts: 1991
Joined: Tue Nov 16, 2010 4:08 pm

Re: Did the ability to Arm Env4 by URL stop working...

Postby GrandWizard » Mon Sep 28, 2020 10:21 am

sks8100 wrote:This place is the black hole man. Put a question on a forum and majority go unanswered. Envisalink needs to up their support model.

for my alarm DCS832/1616 with env 4:

away mode:
http://IP/2?A=3&p=1&X=1234
where 1234 is your alarm code and IP is the IP of the envisalink local server

disarm is
http://IP/2?A=4&p=1&X=1234

for the life of me i cant figure out how to turn on stay mode. However the codes above still work. If anybody know how to turn on stay home please put it down in the thread.

As for user auth i'm passing the credenials through an HTTPBasic auth header in a python script. This way i can connect it to my phone or watch and use siri for the above.

Hope this helps


DSC panels don't allow you to ARM STAY using a code without subsequently breaching an exit zone. Its a "feature" of the panel.

sks8100
Posts: 4
Joined: Mon Aug 31, 2020 6:10 pm

Re: Did the ability to Arm Env4 by URL stop working...

Postby sks8100 » Tue Oct 20, 2020 11:03 pm

@GrandWizard how do you arm it in stay mode without a code then?

there must be a way to do it via the internal IP address....its no different to how i can arm it in stay via the app...it must be calling some API somewhere to do it?

GrandWizard
Posts: 1991
Joined: Tue Nov 16, 2010 4:08 pm

Re: Did the ability to Arm Env4 by URL stop working...

Postby GrandWizard » Wed Oct 21, 2020 9:27 am

sks8100 wrote:@GrandWizard how do you arm it in stay mode without a code then?

there must be a way to do it via the internal IP address....its no different to how i can arm it in stay via the app...it must be calling some API somewhere to do it?


What these people are doing is kinda hacking the local web interface. That interface does not have an option to arm without a code so as far as I know there is no way to do an ARM STAY from the local interface.

The Eyezon mobile app does not use the TPI nor the local interface. It communicates directly with the cloud-based service.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 11 guests