*49 option 4? Open/close for EnvisaLink only?

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

l51683
Posts: 2
Joined: Sat Jun 13, 2020 3:11 am

*49 option 4? Open/close for EnvisaLink only?

Postby l51683 » Sat Jun 13, 2020 3:19 am

I found a post about this from 2013 (and even an Amazon review from 2017) and am hoping there is an update.

I have the EVL4 and I have a monitoring company (using a phone line) on the Vista-20P. Everything works great, except the alarm company doesn’t want me sending Open/Close (disarm/arm) signals unless I pay more per month.

What will happen if I use *49 Option 4 instead of Option 5? I assume I also need to turn *65 and *66 back on if I do that.

Will it have the desired effect? Is there ANY way to get the desired effect?

GrandWizard
Posts: 1973
Joined: Tue Nov 16, 2010 4:08 pm

Re: *49 option 4? Open/close for EnvisaLink only?

Postby GrandWizard » Sat Jun 13, 2020 7:30 pm

You can't have O/C reports not go to the dialer and but still receive Envisalerts.

You can either switch to Envisalarms IP monitoring or you could subscribe to Envisalerts+ which has an option called Synthetic O/C reports. It won't tell you who armed or disarmed, just that the partition is disarmed. You could then turn of *65 and *66


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 20 guests