Envisalink 3 and phone line

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

thanosb13
Posts: 2
Joined: Tue Feb 25, 2020 12:42 pm

Envisalink 3 and phone line

Postby thanosb13 » Sun Mar 01, 2020 9:39 am

Hi there I have a question
I have already set the envisalink 3 to my pc1616 and everything it's ok, I was wondering if I can have the telephone line as back up to call me in my mobile phone when network is down or if I can make them work together example: when a alarm is trigger the eyezon app send notification and phone line call in my mobile. Because I make same tests and only send me notification in app and not call me in my mobile.
Thanks
I fix it,please topic close

SamIam
Posts: 2
Joined: Tue Jun 09, 2020 3:35 pm

Re: Envisalink 3 and phone line

Postby SamIam » Thu Jun 11, 2020 4:57 pm

Hi thanosb13,

I would like to setup ENV4 and DSC same way. If you were able to fix it, could you please share your solution?

Thanks

thanosb13
Posts: 2
Joined: Tue Feb 25, 2020 12:42 pm

Re: Envisalink 3 and phone line

Postby thanosb13 » Sun Jun 14, 2020 8:52 am

Hi
First I believe that you already you have setup the envisalink.
Second I can tell you for DSC panel,my panel is 1616.
If you already setup the envisalink you must program the following in the panel,in section 320 is the channels for every zone, by default is "FF" you must put a number like 01 to every zone that you have program.then section 301,303 to program your telephone numbers that you want to call the panel. Section 310-311 to program system and partition account like 1111. and last one section 350 and select com format 06 residential dial.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 20 guests