EnvisaLink4 with Vista-48LA and Vista-50

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

caiman
Posts: 3
Joined: Tue Jan 21, 2020 9:58 pm

EnvisaLink4 with Vista-48LA and Vista-50

Postby caiman » Tue Jan 21, 2020 10:04 pm

Could anyone tell me if the EnvisaLink4 can be used with the Honeywell Vista-48LA and with the Vista-50?
Will I face any compatibility issues?

Thank's.

Alberto

GrandWizard
Posts: 1933
Joined: Tue Nov 16, 2010 4:08 pm

Re: EnvisaLink4 with Vista-48LA and Vista-50

Postby GrandWizard » Wed Jan 22, 2020 9:01 am

Neither of those panels are supported as they don't support external communicators. You can still use the Envisalink as a remote keypad, but you won't get any Envisalerts.

caiman
Posts: 3
Joined: Tue Jan 21, 2020 9:58 pm

Re: EnvisaLink4 with Vista-48LA and Vista-50

Postby caiman » Wed Jan 22, 2020 1:18 pm

Thank you for your reply GrandWizard.

GrandWizard
Posts: 1933
Joined: Tue Nov 16, 2010 4:08 pm

Re: EnvisaLink4 with Vista-48LA and Vista-50

Postby GrandWizard » Thu Jan 23, 2020 11:52 am

I was talking to a colleague yesterday and the Vista 48LA may actually work. Honeywell seems to have changed its parlance a little which threw me off. Whereas all of the other Vista panels refer to the secondary communicator as the LRR/IP/GSM module, the 48LA calls it an ACM, but it seems to work just the same. You would enable section *29 which is called Ouput in Contact ID to ACM but entering a 1 in that field.

We can't really test it as this Vista seems to only be available in Latin America only so if you do find it works, please let us know.

The Vista 50P we know doesn't work.

caiman
Posts: 3
Joined: Tue Jan 21, 2020 9:58 pm

Re: EnvisaLink4 with Vista-48LA and Vista-50

Postby caiman » Fri Jan 24, 2020 2:19 pm

Perfect, thank you very much.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 3 guests