Firmware Change Log

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

GrandWizard
Posts: 1973
Joined: Tue Nov 16, 2010 4:08 pm

Firmware Change Log

Postby GrandWizard » Tue Jan 07, 2020 9:30 am

Envisalink 4
Version 1.3.163
- UNO - Full 8 Partition Support enabled
- UNO - 24Hour zones no longer trigger swinger shutdowns.
- Envisalarms receviers expanded to 5
- Honeywell Bug Fix - EVL would misrepresent the partition status as Exit Delay when really it was Armed Away with active Trouble (keypad fast beeping)
- Honeywell Bug Fix - Envisalink Sidekick would not switch to secondary receivers for non-CID signals
- option to disable O/C reports for Envisalarms added
- DNS cache increased to help protect against reoccuring Supervision faults due to DNS spoofing/errors

Version 1.3.155
- Secondary DNS servers now supported correctly
- Envisalarms FTC restorals added
- UNO Envisalarms support added
- Honeywell Syslog zone number bug fixed
- E-Bus expansion added to DSC and Honeywell builds
- Honeywell Italian panels now supported
- UNO pulse PGM function fixed
- Bypass and Alarm In Memory status flags added to DSC builds
- Honeywell zone would sometimes show the wrong zone tripped after an alarm. Fixed.
- Full support for the Envisalink Sidekick cellular backup added
- Local network page TPI status removed due to limited code space

Version 1.3.130
- Local oscillator now calibrated to pNTPD
- UNO has swinger shutdown enabled
- UNO double alarm post fixed
- HTTP short timeout bug fixed
- Fixed bug whereby DNS proxies could issues RR TTL under 30 seconds
- FLASH wear-leveling improved
- Revamp of TCP/IP stack to improve overall response of all onboard apps.
- Bug fixed in TCP stack allowed for race condition during retransmissions due to lost data
- Port 0 potential exploit addressed
- New Envisalert to notify users of panel supervision faults
- Synthetic O/C fixed between version 1.1.102 and 1.1.109
- Zone delinquecy timers now can be set to minute or hour resolution
- Improved zone closig heuristics on Honeywell build
- UNO expansion module bus lockup fixed
- UNO zone bypass restore fixed
- Adding SYSLOG client


Envisalink 3/2DS
Version 1.12.202
- DNS cache increased to help protect against reoccuring Supervision faults due to DNS spoofing/errors
- Honeywell Bug Fix - EVL would misrepresent the partition status as Exit Delay when really it was Armed Away with active Trouble (keypad fast beeping)
- option to disable O/C reports for Envisalarms added

Version 1.12.199
- DSC Keybus fault on Envisalarm supervisory fixed

Version 1.12.198
- Secondary DNS servers now supported correctly
- Envivsalarms FTC restorals added
- Bypass and Alarm In Memory status flags added to DSC builds
- Honeywell zone would sometimes show the wrong zone tripped after an alarm. Fixed.

Version 1.12.191
- Improved EEPROM wear-leveling
- Port 0 potential exploit addressed
- New Envisalert to notify users of panel supervision faults
- Fix for multi-partion zones being out-of-order on Honeywell
- Adding Zones Bypassed to TPI
- Bug fixed in TCP stack allowed for race condition during retransmissions due to lost data

GrandWizard
Posts: 1973
Joined: Tue Nov 16, 2010 4:08 pm

Re: Firmware Change Log

Postby GrandWizard » Tue Mar 10, 2020 3:24 pm

SOLO
Version 1.0.112
- Auto-Stay function now working
- 24 Hour Fire, Water, and Panic all now report independently of burglary zones
- Support for the remote sounder added
- Envisalerts buffer increased to 512
- Envisalarms buffer increased to 4096


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 16 guests