Access Eyezon site for further automation

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

dwaynez
Posts: 4
Joined: Thu Oct 10, 2019 1:48 pm

Access Eyezon site for further automation

Postby dwaynez » Thu Oct 10, 2019 2:06 pm

I am new to the Envisalink and Eyezon but I am very familiar with computer programming, Raspberry Pi's etc. I would like some additional functionality and I feel I could get this if I could access Eyezon.com programmatically. Is there a way of accessing the data from another program and then potentially send commands back?

GrandWizard
Posts: 1898
Joined: Tue Nov 16, 2010 4:08 pm

Re: Access Eyezon site for further automation

Postby GrandWizard » Thu Oct 10, 2019 4:16 pm

See the Envisalink TPI.

viewtopic.php?f=6&t=301

dwaynez
Posts: 4
Joined: Thu Oct 10, 2019 1:48 pm

Re: Access Eyezon site for further automation

Postby dwaynez » Thu Oct 10, 2019 4:42 pm

From what I understand, using the TPI is communicating directly the the Envisalink board and not the Eyezon.com web site. Is this correct? I am going to be communicating over a metered network, so I want to minimize the traffic to the Envisalink board. I was thinking that the board is pushing data to the eyezon.com web site and I would be happy picking off data from that website for my additional programming. Is this possible?

GrandWizard
Posts: 1898
Joined: Tue Nov 16, 2010 4:08 pm

Re: Access Eyezon site for further automation

Postby GrandWizard » Fri Oct 11, 2019 8:13 am

No, the cloud API is still not public. We've been told that one day it will be made public.

dwaynez
Posts: 4
Joined: Thu Oct 10, 2019 1:48 pm

Re: Access Eyezon site for further automation

Postby dwaynez » Mon Oct 14, 2019 7:10 pm

In the TPI documentation it says that the envisalink board can only accept one tcp connection. If I have the board setup and connected to eyezon.com can I then have a local connection as well to the board and use the TPI to get data and interact with the board or do I have to terminate my connection to eyezon.com to have a TPI interface or am I able to have both connections active at the same time?

GrandWizard
Posts: 1898
Joined: Tue Nov 16, 2010 4:08 pm

Re: Access Eyezon site for further automation

Postby GrandWizard » Mon Oct 14, 2019 8:45 pm

dwaynez wrote:In the TPI documentation it says that the envisalink board can only accept one tcp connection. If I have the board setup and connected to eyezon.com can I then have a local connection as well to the board and use the TPI to get data and interact with the board or do I have to terminate my connection to eyezon.com to have a TPI interface or am I able to have both connections active at the same time?


The connection to the reporting servers (Envisalerts), the local web page, the TPI, and the SYSLOG client are all independant services.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 26 guests