New Feature Requests

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

monstergerm
Posts: 6
Joined: Mon Jun 27, 2016 3:42 pm

Re: New Feature Requests

Postby monstergerm » Sat Mar 17, 2018 5:11 pm

Bypassed zones for partitions 2 and higher

Is there anyway to have the DSC panel communicate to EVL4 the bypass status of zones in partitions other than 1? The cmd 616 gets only triggered from partition 1 zone bypass changes. Something that should also be mentioned in the TPI.

hokie21
Posts: 43
Joined: Tue Oct 22, 2013 10:17 pm

Re: New Feature Requests

Postby hokie21 » Sun May 13, 2018 6:48 pm

I'd like to see an HTTP command (such as http://192.168.0.50/2?A=5&p=1&X=1111) for EVL3 and EVL4 to allow setting of additional alarm states other than "off" and "instant arm." This would allow easy use with HA-Bridge and Amazon Echo skills. The most important one to allow is "arm away." Looking at the forum history, it seems that several people have tried to get "arm away" to work using HTTP commands to the EVL without success. I suspect a code change to the EVL is required to make this work.

mikep
Posts: 122
Joined: Wed May 30, 2012 1:49 pm
Contact:

Re: New Feature Requests

Postby mikep » Sun May 13, 2018 9:53 pm

You could use the TPI for this, it already has the correct API calls.

I use the TPI in my DscServer app for exactly this and more. I also have a homebridge app that bridges the DscServer to HomeKit and to echo (and to google home) for those that don't want to wait.

hokie21
Posts: 43
Joined: Tue Oct 22, 2013 10:17 pm

Re: New Feature Requests

Postby hokie21 » Mon May 14, 2018 1:21 am

I'm using a Vista 20P panel. Does DscServer also work with Ademco?

hokie21
Posts: 43
Joined: Tue Oct 22, 2013 10:17 pm

Re: New Feature Requests

Postby hokie21 » Mon May 14, 2018 7:20 pm

I got it working using a combination of HA-Bridge and envisakit which allows command line commands to poke the TPI.

mikep
Posts: 122
Joined: Wed May 30, 2012 1:49 pm
Contact:

Re: New Feature Requests

Postby mikep » Mon May 14, 2018 8:31 pm

Cool.

Unfortunately I'm only able to support DSC panels with the DscServer, I don't have access to a vista panel.

alexandreb78
Posts: 1
Joined: Wed Jun 13, 2018 8:12 am

New Feature Requests Chime DSC

Postby alexandreb78 » Wed Jun 13, 2018 8:17 am

Hi,

I would like toknow if it would bw possible to add two command :
door chime enable
door chime disable
Please?

I currently use *4 for the door chime feature with my DSC panel but I would like to send a blind command so I wouldn't have to check the status


Regards,
Alexandre

showard1017
Posts: 1
Joined: Tue Apr 24, 2018 8:42 pm

Re: New Feature Requests

Postby showard1017 » Sun Aug 12, 2018 8:31 pm

Envisalink 4 with Honeywell 20P. Is it possible to add a feature whereby bypassed zones are indicated on the zone chart with a special color, say yellow? This way you could know that the zones you wish to bypass are actually programmed properly. My system is older and a couple of the devices are a little flaky. Until I can fix them permanently I'd like to just program around them temporarily. Right now, I'm never sure if both of them a bypassed. If they are not, of course they set the alarm off when they misfire. I do not want to delete them because I plan to fix the errant devices.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 11 guests