Two EnvisaLinks on Two Vista20P one account possible?

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

C2GOuser
Posts: 2
Joined: Thu Apr 26, 2018 1:54 pm

Two EnvisaLinks on Two Vista20P one account possible?

Postby C2GOuser » Thu Apr 26, 2018 2:16 pm

New to the forum and hello!

Is it possible to have two EnvisaLinks on two separate Honeywell Vista 20P panels with one Gmail account, will these work together, is there a way, or better way to set this up? I presently get alert notifications via my Smartphone which has only one gmail active. I assume I could set up a second email address but that defeats the purpose of notifications on one account. The background on my question is below.

I have a Vista 20P in my house, I use a standard 6160 non-RF keypad. It is not monitored by a central monitoring station.

I have a workshop about 50 feet from the house. I installed a second Vista 20P in the workshop. I know the 20P is a two partition system but since I did not have a RF keypad on system one I found it just as easy to put in a new separate independent Vista 20P in the workshop. It is not monitored by a central monitoring station.

I installed an EnvisaLink in my house to see if I liked it, etc. The EnvisaLink installed without a hitch and runs great, I am very happy with it. This brings me back to the original question, if I wanted to add an EnvisaLink to my workshop, will it work? I have Internet/AC Power in the workshop, System One in the house runs on one PC router which is in the house.

Thanks for any advice or input.

GrandWizard
Posts: 1764
Joined: Tue Nov 16, 2010 4:08 pm

Re: Two EnvisaLinks on Two Vista20P one account possible?

Postby GrandWizard » Sun Apr 29, 2018 9:49 am

Sure, you can have as many devices as you want on your account. Many users have more than one property with Eyezon.

C2GOuser
Posts: 2
Joined: Thu Apr 26, 2018 1:54 pm

Re: Two EnvisaLinks on Two Vista20P one account possible?

Postby C2GOuser » Mon Apr 30, 2018 11:59 am

Thank you for confirming. Since you did not specify any known issues or complexities I will assume it is straight forward.

My big concern was having the software integrating two systems on one account and some kind of conflict.

Thank you again for the input. If I run into a snag I will be back.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 7 guests