What does message "Delinquency" mean?

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

omalbec
Posts: 4
Joined: Wed Jan 18, 2012 6:10 pm

What does message "Delinquency" mean?

Postby omalbec » Mon Feb 20, 2012 9:42 am

This one popped up this morning. What does it mean? Thanks.

quatchi
Posts: 37
Joined: Wed Jun 08, 2011 1:04 am

Re: What does message "Delinquency" mean?

Postby quatchi » Mon Feb 20, 2012 3:50 pm

There has been no activity in a particular partition (3 weeks?)

omalbec
Posts: 4
Joined: Wed Jan 18, 2012 6:10 pm

Re: What does message "Delinquency" mean?

Postby omalbec » Mon Feb 20, 2012 7:35 pm

Not sure what "activity" consists of. While we haven't armed it for quite a while, my log shows appropriate zone activity. We had a power outage a couple of days ago that also registered. "AC Failure Trouble Restoral- Partition 1" Is this telling me my battery needs replacing and that I'm being delinquent in not doing so? :?:
Thanks.

CustomElectronics
Posts: 4
Joined: Sat Feb 11, 2012 4:53 pm

Re: What does message "Delinquency" mean?

Postby CustomElectronics » Tue Feb 21, 2012 10:43 am

"We had a power outage a couple of days ago that also registered. "AC Failure Trouble Restoral- Partition 1" Is this telling me my battery needs replacing and that I'm being delinquent in not doing so? :?:"

no this is just panel logging that it lost AC power and that same was restored just as it reads
depending on the model of panel, and programing, you may get a few different forms of message related to this "event" as loss of power is a "trouble" and power comes back on is a "restoral"

hypnosis4u2nv
Posts: 72
Joined: Tue May 03, 2011 8:49 am

Re: What does message "Delinquency" mean?

Postby hypnosis4u2nv » Sat Apr 14, 2012 1:17 pm

To answer the question, the default setup of the Delinquency condition is 30 days. When set in days, it monitors Arming activity. When set in Hours, it monitors Zone Activity. In your case, if no arming is done in 30 days, the panel trips the Delinquency fault. You could change the setting to the maximum of 255, but you should arm the system at least once during that time to avoid the Delinquency fault.

The programming is found in Installers Section #377 - Must cycle down to the 11th option.

Delinquency Transmission Delay: Number of hours (Activity Delinquency) or days (Arming Delinquency) the panel will delay before transmitting the event to the central station. Valid entries: [001] to [255].

Installers Section #380 Option 8 controls either days or hours for the Delinquency.

[8] ON: the Delinquency feature follows zone activity. OFF: the Delinquency feature follows arming.

ptr727
Posts: 2
Joined: Mon May 26, 2014 9:45 pm

Re: What does message "Delinquency" mean?

Postby ptr727 » Wed Jun 25, 2014 10:08 am

I just got a delinquency alert in email, had no idea what it meant, and google sent me here.

It would really be a great help if email alerts could describe the meaning of an event, especially when using a term like delinquency. Maybe you could include a URL to a page that describes the event in question.

P.

f11
Posts: 3
Joined: Sat Jul 06, 2019 11:41 am

Re: What does message "Delinquency" mean?

Postby f11 » Thu Aug 08, 2019 2:23 am

I know this thread is ancient by most fora standards, but ... what's the consequence of ignoring the delinquency message?

I got this terse message today on the one month anniversary of the last time I armed-disarmed my system via the EnvisaLink 4 card and EyezOn iOS app. Now that I know what it means (courtesy all those who asked 5-7 years ago), what happens if I don't arm-disarm my system for another 30 days? Does my siren trip in the middle of the night, or the system go into a kernel panic, or something? Or do I get a delinquency message every day until I do an arm-disarm cycle? Does the delinquency status just remain forever in my recent events, until I do an arm-disarm cycle to clear it?

Sorry, not trying to be a smart-a$$ ... just not sure how urgent or action-based the message is. I'm still connected to my monitoring service while I do further testing. Do they get this message as well, or is it strictly an EVL-4 / EyezOn alert?
Rod
Edmonton AB CA
# EVL4 DSC # 1 Partition # 7 zones: 4 Motion 3 Doors #

GrandWizard
Posts: 1905
Joined: Tue Nov 16, 2010 4:08 pm

Re: What does message "Delinquency" mean?

Postby GrandWizard » Thu Aug 22, 2019 7:09 pm

The Delinquency signal goes to the central station to inform them that the customer isn't using their security system. Its just to warn the dealer and station that the system isn't protected as the customer isn't arming it. It is completely benign otherwise.

For more information on DSC's delinquency event see your DSC installers guide. As another user posted back in 2012, you can turn this feature off.


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: Google [Bot] and 26 guests