FAP for DSC, finally here.

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

GrandWizard
Posts: 1769
Joined: Tue Nov 16, 2010 4:08 pm

FAP for DSC, finally here.

Postby GrandWizard » Fri Oct 17, 2014 5:09 pm

Even though this feature was announced in the firmware release of April, it is now implemented on the portal.

You can initiate a (F)ire (A)mbulance (P)anic from the portal and set your alarm off if you so wish.

Remember, you are actually setting your alarm off so if your system is monitored by Eyezon or another party, you will initiate action. i.e. Fire trucks will arrive at your house.

On your Envisalink detail page, under partition status, you will see three buttons: F, A, and P. Press them and approve the confirmation popup to initiate an FAP request.

Enjoy, and use it wisely!

peipe
Posts: 3
Joined: Fri Jun 19, 2015 9:22 pm

Re: FAP for DSC, finally here.

Postby peipe » Fri Jun 19, 2015 9:24 pm

Hi
Is there a plan to include the F A P keys on the mobile version of Eyez-On?

Thanks!

GrandWizard
Posts: 1769
Joined: Tue Nov 16, 2010 4:08 pm

Re: FAP for DSC, finally here.

Postby GrandWizard » Sun Jun 21, 2015 9:56 am

It's still in the bug list. I'm bump it.

peipe
Posts: 3
Joined: Fri Jun 19, 2015 9:22 pm

Re: FAP for DSC, finally here.

Postby peipe » Sun Jun 21, 2015 11:06 am

thanks!

simon_314
Posts: 4
Joined: Wed Nov 04, 2015 2:17 pm

Re: FAP for DSC, finally here.

Postby simon_314 » Sun Jun 03, 2018 9:14 am

Hi

Any news regarding F A P on mobile version of Envisalink? Is there another way to sound the DSC alarm from the mobile version if I see burglars on camera from a distance?

zedder
Posts: 19
Joined: Tue Dec 08, 2015 8:10 pm

Re: FAP for DSC, finally here.

Postby zedder » Mon Jun 04, 2018 9:00 pm

You can trigger a 2 second alarm which should deter/scare the burglars away...

In the mobile app, press COMMANDS, then under the CUSTOM SEQUENCE section, enter the following:

*6 (master code) 4


Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”

Who is online

Users browsing this forum: No registered users and 13 guests